Registering the phone to Unify OpenScape Enterprise Express

Use the Settings page of the Dolby Conference Phone web interface to specify the Unify OpenScape Enterprise Express account settings and register the phone.

Procedure

  1. Select Settings > IP PBX Settings > Account.

  2. Change the Account settings as shown:
    • Display Name: The name of the phone user or conference room (for example, Sam Smith or Board Room)
    • Extension Number/Address: Extension number (mandatory)
    • Display Number: Extension number

      If you do not enter a value, the Extension Number/Address value displays.

    • Transport Type: AUTO (recommended; works with TCP and User Datagram Protocol)
    • Secure Media: Mandatory
  3. Change the Server settings as shown:
    • Primary Call Server/Outbound Proxy: IP address of your Unify OpenScape Enterprise Express.
    • Primary Server/Outbound Proxy port: 5060.
    • If you have a secondary (failover) server available, enter the details in the Secondary Call Server/Outbound Proxy field.
    • Set Transport Type to match your selection in the connection settings of the previous procedure.

    library_booksNote:

    Ensure that you are adding the correct Primary/Secondary account details.

  4. Update the credentials.

    These settings are mandatory for digest authentication:

    1. Enter the User Credential Name that you created in Unify OpenScape Enterprise Express.
    2. Enter the User Credential Password that you created in Unify OpenScape Enterprise Express.
    3. Enter the server realm you created, or add an * (asterisk) to cover any string for this field.
    4. Confirm the password, and click Save.

    If the information is correct, the phone registers with Unify OpenScape Enterprise Express.
  5. To verify the registration with Unify OpenScape Enterprise Express, go to Status > System > Device.